Description

Touch Test — Watch Hardware Diagnostic

Test your Pebble's touchscreen, buttons, motion sensor, and RGB backlight in one
fast, no-fuss app.

Five diagnostics:

• Touch — tap anywhere and a red marker drops exactly where the watch registered
  your touch, with the raw x, y coordinate over a reference grid and crosshairs.
  The quickest way to check whether your touchscreen is aligned.

• Zones — sweep your finger across the whole screen; each zone turns green until
  every one has registered ("ALL ZONES OK"), so you can find dead spots. Hold
  SELECT to reset and run it again.

• Buttons — press and hold BACK, UP, SELECT, or DOWN and watch the matching
  on-screen button light up, with an animation from that button's edge of the
  screen. Holding shows a sustained "held" state.

• Motion — a live tilt bubble-level, per-axis X / Y / Z readouts, and a "SHAKE!"
  flash, driven by the accelerometer.

• Backlight — a color wheel; touch it to tint the RGB backlight LED to any color,
  with a live hex readout. Hold SELECT to reset the light to white.

Getting around: UP / DOWN switch diagnostics with a smooth Pebble-style slide;
SELECT opens a menu to jump straight to any test (or Exit). Lightweight and
event-driven — nothing runs in the background, so it won't drain your battery.

Built for Pebble Time 2 (emery) and Pebble Round 2 (gabbro) — the Pebble models
with a touchscreen and color backlight.